2G and 2.5G Networks

Planning of 2G and 2.5G (GSM/GPRS/EDGE) networks

Prediction of the SNIR (in downlink) 


Figure: Predicted SNIR
For each mobile station the SNIR (in downlink) is determined (for the serving cell).
SNIR is based on cochannel interference and thermal noise in relation to the received power from the serving cell.

This map is determined individually for each MCS or service. The capabilities of the mobile stations (defined for this MCS or service) are therefore additionally considered (i.e. max. available Tx power in the mobile station, MS antenna gain,...).

If the max. SNIR is below a target (defined for each MCS or service individually by the user), the pixel is not assigned to a cell.



Further results

Best Server
(Cell Assignment)


Reception Probability 



Max received
power in downlink
Tx power of
mobile stations
(to reach a BS)
Tx power of
base stations
(to reach a MS)

SNIR

Number of
available channels

 

Download a brochure of the 2G/2.5G Network Planning Tool
Read more about  GSM (2G) network planning.
Read more about the GPRS/EDGE (2.5G) network planning
Read more about the Network Planning Modules in WinProp




































 

Features

Features of the 2.5G (GPRS/EDGE) module at a glance:

  • Coverage analysis based on accurate propagation models
  • Consideration of downlink and uplink
  • Adaptive coding and modulation schemes (MCS) are supported with individual SNIR targets
  • CoChannel Interference anaylsis
  • Coverage analysis (incl. Fast Fading margin)
  • Capacity estimation
  • Required Tx power in up- and downlink 
  • Multi-Service concept allows user-defined services   
  • Easy handling of the databases  

Demo Project 


All possible results to be obtained with the 2.5G network module can be seen on the sample project page.

Brochure